Scorpion (BattleMech)

Revision as of 14:56, 7 April 2019 by Arthinas (talk | contribs) (Updated categories)
Scorpion (BattleMech)
Scorpion
Production information
Manufacturer Brigadier Corporation

Defiance Industries [1]

Production Year 2570[2]
Model SCP-1N
Class Medium
Cost 5,201,800 C-bills
Technical specifications
'Mech type Inner Sphere BattleMech
Mass 55 tons
Chassis Brigadier 800F
Armor 4/Star Slab
Engine VOX 330
Communications System Garret 500A
Speed 97.2 km/h
Armament
BV (1.0) 786
BV (2.0) 1,019[3][4]


Description

Built before the technological renaissance that saw a more open view of quadruped 'Mechs, and introduced by the Terran Hegemony in 2570[5], the Scorpion is an example of an idea that was ahead of its time. The 'Mech was originally intended as a stable weapons platform but as the model came into service it was relegated to an infantry support role. The design itself was also shunned by most MechWarriors due to the rough ride of the four-legged gait. If the design is looked at through an objective standpoint, the Scorpion is a very capable 'Mech at its intended role. With the PPC mounted in the body and with the inherent stability of the design, the 'Mech is a very stable platform for long-range fire. One quirk in the design, though, that does put it at something of a disadvantage is the lack of jump jets used on most medium 'Mechs. The top speed of 97.2 kph, however, does help to alleviate any maneuverability concerns a pilot may have.[3]

At some point there had been an attempt to create a LAM version of the Scorpion, an unworkable project that was abandoned and literally buried in a bunker on Hesperus II. The long-forgotten blueprints and prototype remains were found by chance in 3065. Although the Scorpion LAM project as such had been unsuccessful, it had succeeded in streamlining components and redesigning the leg suspension, and applying these modifications alleviated the famously bumpy ride on the -12S and all subsequent variants.[6]

Weapons and Equipment

The Scorpion carries a very basic weapons payload. Its primary weapon is an Anderson Armaments PPC which, when combined with the Scorpions highly stable chassis, makes the 'Mech an ideal close support 'Mech. For close range combat, the Scorpion carries a Marvel Six-Load SRM-6. This weapon allows the Scorpion to capitalize on any breaches in the enemy's armor.[3] The scorpion has another, smaller swivel-mount looking tube beneath the cockpit, perhaps intended for a flamer, machine gun, or small laser, but this mount does not actually work and is purely cosmetic; speculation is that it was dropped after the frame was completed and removing it would have slowed down production.

Variants

  • SCP-1TB 
    This Scorpion uses a pair of Light PPCs as its main armament, backed up by a MML-9. A Light Fusion Engine provides power and a MASC system allows it to put on bursts of speed of up to 120km/h. BV (2.0) = 1,185[8]
  • SCP-10M 
    This post-Jihad version introduced in 3080 uses an Endo Steel chassis and XL Engine to propel the 'Mech at a top speed of 119 km/h. The use of these lighter components, as well as an XL Gyro, allows the Scorpion to carry a Heavy PPC, LRM-10, and nine tons of armor. Ten double heat sinks keep the 'Mech's weapons in constant use. BV (2.0) = 1,458[9]
  • SCP-12C 
    This 3067 version of the Scorpion is similar to the original design. The engine has been upgraded to an Extralight engine and it now uses Ferro-Fibrous armor for protection. The primary weapon is an ER PPC and the 12C has double heat sinks to handle the large heat load from the weapon. The SRM-6 was replaced with an Improved Narc Missile Beacon, which allows friendly units to fire missiles at enemies that have been tagged with an iNarc pod with more accuracy. Additionally, a C3i computer has been added to allow other C3 equipped units to share targeting telemetry. BV (1.0) = 1,058, BV (2.0) = 1,259[10]
  • SCP-12K 
    This Scorpion variant uses an XL Engine and ten tons of Ferro-Fibrous armor. A C3 Computer is included to control a C3 network. This design is armed with a Snub-Nose PPC, an MML-9 and two tons of ammunition, as well an an ER Medium Laser. BV (2.0) = 1,260[11]
  • SCP-12S 
    The 12S variant of the Scorpion is produced by Defiance Industries and is a complete redesign of the Scorpion. The 'Mech is constructed using an Endo Steel chassis and is powered by a Light Fusion Engine. The saved weight is used to upgrade the primary weapon to an LB-X Autocannon/10 and for close range combat the Scorpion retains its SRM-6 launcher. BV (1.0) = 969, BV (2.0) = 1,109[12]


Custom Variants

  • SCP-1N Wednall 
    Wendall Puritan's customized standard SCP-1N Scorpion exchanges the PPC for a Large Laser. The extra tonnage goes toward additional armor.[3] BV (2.0) = 1043 [13]

Notes

The (original) Scorpion variants and artwork from 3025 were part of the Unseen 'Mech designs. The Scorpion was Reseen in 3067 with new variants using revised artwork.[14]

Related BattleMechs

  • Scorpion LAM - A failed attempt to develop a Land Air Mech version of the Scorpion, this prototype nevertheless led to marked improvements to ride smoothness in later variants of the original.

Notable Pilots

BattleMech Gallery

References

  1. Objectives: Lyran Alliance, p.12
  2. MUL online date for the Scorpion (BattleMech)
  3. 3.0 3.1 3.2 3.3 3.4 Technical Readout: 3039, p. 288
  4. Record Sheets: 3039 Unabridged, p. 458
  5. Era Digest: Age of War, p. 11, "BattleMech Tech Timeline"
  6. Technical Readout: Project Phoenix, p. 28
  7. Record Sheets: 3085 Unabridged — Project Phoenix, p. 69
  8. Record Sheets: 3085 Unabridged — Project Phoenix, p. 70
  9. Technical Readout: 3085, p. 241
  10. Record Sheets: 3085 Unabridged — Project Phoenix, p. 72
  11. Record Sheets: 3085 Unabridged — Project Phoenix, p. 73
  12. Record Sheets: 3085 Unabridged — Project Phoenix, p. 74
  13. Record Sheets: 3039 Unabridged, p. 463
  14. Technical Readout: Project Phoenix

Bibliography