Templar

Revision as of 22:53, 9 September 2020 by Ebakunin (talk | contribs)
Templar
Templar
Production information
Manufacturer Kallon Industries
Production Year 3062[1]
Model TLR1-O
Class Assault
Cost 25,338,448 C-bills
Technical specifications
'Mech type Inner Sphere OmniMech
Mass 85 tons
Chassis Kallon Type XIX Endo Steel
Armor Starshield A with CASE
Engine KalTek 340 XL
Communications System Newberg Telescan 17
Targeting Tracking System Spar 3C MegaTrak
Heat Sinks 13 Double heat sinks
Speed 64.8 km/h
Armament

Primary Configuration

BV (1.0) 1,770[2]
BV (2.0) 2,045[3][4]


Description

With a noticeable lack of OmniMechs designed in the Federated Suns, Field Marshal Duke George Hasek went over the heads of the Department of the Quartermaster and commissioned Kallon Industries to design an assault OmniMech and backed the project with his own considerable financial resources. The resulting 'Mech is a force to be reckoned with on the modern battlefield. The Templar is built on a lightweight Kallon Type XIX Endo Steel chassis and is powered by a KalTek 340 XL engine that gives the 'Mech a top speed of 64.8 km/h while sacrificing durability. The Templar has thirteen fixed double heat sinks and is armored with sixteen and a half tons of Starshield A armor with CASE fixed in the right torso. Overall, this allows the Templar to have forty tons of free pod space for weapons and equipment which the 'Mech uses effectively in its various configurations.

Weapons and Equipment

The primary configuration of the Templar is intended to be able to engage an enemy effectively at any range. For effective long range hitting power, the Templar carries a powerful Gauss Rifle. If the Templar does close with an enemy, it can bring its highly accurate Large Pulse Laser, Medium Pulse Laser, and two ER Medium Lasers to bear on a target. For increased accuracy, the Gauss Rifle and all the lasers are linked to an advanced Targeting Computer. The Templar Prime has a Streak SRM-4 launcher for seeking weak points in an enemy's armor.

Alternate Configurations

  • Alt. Config. A 
    Intended for long range combat, the Templar A is configured to engage an enemy at long ranges. To do this, it carries an ER PPC as its primary weapon backed up by an Ultra Autocannon/10 which can fire at twice the rate of a standard autocannon. Both of these are linked to an advanced Targeting Computer for increased accuracy. For close combat, the Templar A has a Streak SRM-6 launcher and for increased mobility this configuration has four jump jets, letting it jump up to one hundred and twenty meters. To protect the 'Mech from enemy electronic warfare systems, the 'Mech has a Guardian ECM Suite and to handle the 'Mech's heavy heat load, it has an additional double heat sink. BV (1.0) = 2,047 BV (2.0) = 2,070[5]
  • Alt. Config. B 
    A workhorse configuration, the Templar B can engage an enemy at either short or long ranges. For long range combat, the Templar B carries an ER PPC. For intermediate ranges, the 'Mech has three Rotary Autocannon/2s and also has two ER Medium Lasers for close combat. To handle the 'Mech's heat load, the Templar B has four additional double heat sinks. BV (1.0) = 1,451 BV (2.0) = 1,806[6]
  • Alt. Config. C 
    A close combat configuration, the C configuration of the Templar carries a devastating LB-X Autocannon/20 as its primary weapon, which can fire both solid rounds and shotgun-like cluster rounds. Also for close range, the Templar C has five Medium Pulse Lasers and an ER Medium Laser, which can be used to devastating effect at short range. For long range defense, the Templar carries a single ER PPC. To add mobility to the 'Mech, it has four pod-mounted jump jets that let the Templar C jump up to one hundred and twenty meters. An additional heat sink is added to help handle the 'Mech's heat. BV (1.0) = 1,726 BV (2.0) = 2,063[7]
  • Alt. Config. F 
    Another command variation, this configuration mounts a C3 Master computer. It carries three Medium Pulse Lasers, a Heavy PPC, and a Light Gauss Rifle. Four jump jets give it a 120 meter jump range. BV (2.0) = 2,029[10]
  • Alt. Config. G 
    Apparently intended for long range direct fire support or anti-aircraft work, this configuration carries three LB 2-X autocannons, an ER PPC, and a Light Gauss Rifle. It can share targeting data with lancemates via a C3 Slave unit. BV (2.0) = 1,632[11]
  • Alt. Config. H 
    This variation carries an MRM-30 with Apollo FCS in each arm. These are supported by a pair of Light PPCs. An ER Flamer provides anti-infantry support, and a Targeting Computer enhances the accuracy of the energy weapons. A C3 Slave unit allows the Templar to share targeting data with lancemates, and additional mobility is provided via four jump jets. BV (2.0) = 1,958[12]
  • Alt. Config. I 
    This configuration carries a C3 Slave unit, fifteen double heat sinks, two Heavy PPCs, and a Gauss Rifle. BV (2.0) = 2,202[13]
  • Alt. Config. U 
    This variant was designed for underwater operations. In addition to four UMUs it is also equipped with a BattleMech HarJel System to prevent hull breaches. Three Medium Pulse Lasers and a Large Pulse Laser provide energy weapon support. An SRT-6 and LRT-10 torpedo launcher increase the odds of breaching an enemy unit's armor. A C3 Slave allows the Templar U to share targeting data with friendly units. BV (2.0) = 1,747[15]

Non-Standard Configurations

  • Grayson 
    This configuration was invented by Lieutenant-Colonel Grayson Addison from the 8th Syrtis Fusiliers. The Grayson configuration is armed with two Autocannon/5s for long range combat and has four ER Medium Lasers for close combat. The autocannons and lasers are all linked to a Targeting Computer for increased accuracy. To seek out weak points in an enemy's armor, the Grayson configuration has two Streak SRM-4 launchers. In order to handle its heat load more easily, this configuration has an additional double heat sink and also has three jump jets, which allow it to jump up to ninety meters. BV (1.0) = 1,670[citation needed]BV (2.0) = 1,868[16]

Notable Pilots

  • During the FedCom Civil War, both Ardan Sortek and Tancred Sandoval piloted Templars during the final months of the conflict. A final push by pro-Katherine forces led to Sortek's death, making the Templar his last 'Mech.

Related Designs

  • Templar III - New version of the Templar, which serves as its replacement due to Kallon's factories on Talon, a moon of Wernke, being destroyed during the Jihad.

Notes

In German products the unit's proper name was perfectly translated to Templer. The model code was left unchanged.

Gallery

References

  1. MUL online date for the Templar
  2. Technical Readout: 3067, p.94 - BV 1
  3. Record Sheets: 3067 Unabridged, p. 156
  4. MUL Profile of Templar including its BV2
  5. Record Sheets: 3067 Unabridged, p. 157
  6. Record Sheets: 3067 Unabridged, p. 158
  7. Record Sheets: 3067 Unabridged, p. 159
  8. Record Sheets: 3067 Unabridged, p. 160
  9. Record Sheets: 3067 Unabridged, p. 161
  10. Record Sheets: 3067 Unabridged, p. 162
  11. Record Sheets: 3067 Unabridged, p. 163
  12. Record Sheets: 3067 Unabridged, p. 164
  13. Record Sheets: 3067 Unabridged, p. 165
  14. Record Sheets: 3145 New Tech, New Upgrades, p. 173
  15. Record Sheets: 3085 Unabridged — Old is the New New, p. 113
  16. Record Sheets: 3067 Unabridged, p. 166
  17. Record Sheets: 3067 Unabridged, p. 167
  18. Spotlight On: Unending Faith, p. 20 - "Templar TLR1-OBLO"
  19. Sword of Sedition, p. 288
  20. The Anvil, p. 126
  21. Experimental Technical Readout: Davion, p. 7 - Pendragon article notes being loosely based on the original Templar
  22. Technical Readout: Prototypes, p. 138 - Pendragon enters limited production at General Motors plant on New Valencia.

Bibliography