Vampyr
[[Image:|191px|Vampyr]] | |
Vampyr | |
---|---|
Production information | |
Manufacturer | |
Use | SalvageMech |
Class | |
Technical specifications | |
'Mech type | Inner Sphere |
Mass | |
Chassis | |
Armor | |
Engine | |
Speed | km/h |
Armament |
1 x Radial FlexiSprayer |
BV (1.0) | ??? |
Description
The Vampyr was created by the Bristol SalvageWorks of the Magistracy of Canopus. The Quad type Industrial 'Mech is used by the MAF's Canopian Salvage Corps. With intended of re-constituting 'Mech weaponry, armor plate, electronics, and liquid coolant from wrecked BattleMechs. Many times Vampyr crews are required to breakdown potential salvage and place them into one of the many on board cargo bays. Since joining the Trinity Alliance, MoC's Vampyr has improved its capacities with inclusion of new technologies.
Equipment and Capacities
The vehicle principle equipment is its Industrial TSM, which allows the 80 ton machine haul move salvage than normal vehicles. It has Liquid Sprayer to either pump fluids into its tanks, or to cool off friend BattleMech. The Nissan 320 Rated Fuel Cell engine has been given extended range by giving 3 ton extra fuel tank. To protect the 'Mech's hull, its been given 7 tons of Industrial Armor. In addition to its armor protection, the entire design has been evironmentally sealed.
Cargo
The vehicle is equipt 2 two-ton liquid cargo bays, for storage of coolant or retrivable liquid salvage.
The 'Mech is equip with 8 one-ton Cargo Bays for storge purposes.
Related Designs
- SC-V Scavenger SalvageMech - Vampyr's predessor, which lacks the Vampyr's TSM and environmental sealing. The unit was noted being in service with defunct Gray Death Legion. BV = ??
Notes
The design at this time has no record sheets.