Difference between revisions of "Ostscout"

m (add update needed template)
m (grammatical fixes)
Line 19: Line 19:
  
 
==Description==
 
==Description==
The ''Ostscout'' was designed as strictly a recon [['Mech]]. In order for the ''Ostscout'' to be successful in this mission it was built with a maximum speed of 129.6 kph. The design also utilizes eight [[jump jet]]s to give it a jumping capacity of 240 meters, allowing it to outmaneuver almost any [[BattleMech]] in existence. The ''Ostscout'' also relies on an advanced sensor suite to allow it to get information about the surrounding terrain and the disposition of enemy forces. Most ''Ostscout'' pilots will not even attempt to engage against any enemy as the advanced sensor system is extremely rare and is just about impossible to get replaced.
+
The '''''Ostscout''''' was designed a pure recon [['Mech]]. To that end, it was built with a maximum speed of 129.6 kph. The design also utilizes eight [[jump jet]]s, giving it a jumping capacity of 240 meters annd allowing it to outmaneuver almost any [[BattleMech]] in existence. The ''Ostscout'' also relies on an advanced sensor suite to gather information about the surrounding terrain and the disposition of enemy forces. Most ''Ostscout'' pilots will not even attempt to engage enemy 'Mechs, as the advanced sensor system is extremely rare and nearly impossible to replace.
  
 
==Armament==
 
==Armament==
Line 27: Line 27:
 
* OTT-7Jb - Used by the [[SLDF Royal units]], the 7Jb is an upgrade that uses [[Endo Steel]] to free up enough mass for a [[Beagle Active Probe]].<ref>''Technical Readout: 3075'', p. 169</ref> BV (2.0)= 610<ref>''Record Sheets: 3075 Unabridged'', p. 157</ref>
 
* OTT-7Jb - Used by the [[SLDF Royal units]], the 7Jb is an upgrade that uses [[Endo Steel]] to free up enough mass for a [[Beagle Active Probe]].<ref>''Technical Readout: 3075'', p. 169</ref> BV (2.0)= 610<ref>''Record Sheets: 3075 Unabridged'', p. 157</ref>
  
* OTT-7K - The -7K ''Ostscout'' takes advantage of the new [[TAG]] laser designator and replaces the [[Medium Laser]] with it. Otherwise, the -7K ''Ostscout'' is identical to the 7J model. BV (1.0) = 372, BV (2.0) = 484<ref>''Record Sheets: Phoenix Upgrades'', p. 53</ref>
+
* OTT-7K - The -7K ''Ostscout'' replaces the [[Medium Laser]] with the new [[TAG]] laser designator, sacrificing its limited offensive capability to allow it to designate targets for [[Arrow IV]] artillery missiles. Otherwise, the -7K ''Ostscout'' is identical to the 7J model. BV (1.0) = 372, BV (2.0) = 484<ref>''Record Sheets: Phoenix Upgrades'', p. 53</ref>
  
 
* OTT-9CS - The -9CS model is a complete upgrade of the venerable ''Ostscout''. The [['Mech]] has been rebuilt from the ground up with an [[Endo Steel]] internal structure. In addition, the design uses an [[extralight engine]] to free up weight for advanced electronics and weaponry. For self-defense, the -9CS model carries two [[ER Medium Laser]]s and an [[ER Small Laser]]. For scouting purposes, the [['Mech]] carries a Guardian [[ECM suite]], a Beagle [[Active Probe]], a [[TAG]] laser designator, and an [[improved C3 computer]]. BV (1.0) = 734, BV (2.0) = 940<ref>''Record Sheets: Phoenix Upgrades'', p. 54</ref>
 
* OTT-9CS - The -9CS model is a complete upgrade of the venerable ''Ostscout''. The [['Mech]] has been rebuilt from the ground up with an [[Endo Steel]] internal structure. In addition, the design uses an [[extralight engine]] to free up weight for advanced electronics and weaponry. For self-defense, the -9CS model carries two [[ER Medium Laser]]s and an [[ER Small Laser]]. For scouting purposes, the [['Mech]] carries a Guardian [[ECM suite]], a Beagle [[Active Probe]], a [[TAG]] laser designator, and an [[improved C3 computer]]. BV (1.0) = 734, BV (2.0) = 940<ref>''Record Sheets: Phoenix Upgrades'', p. 54</ref>
Line 33: Line 33:
 
* OTT-9S - The -9S model is also a rebuild of the ''Ostscout''. This model also uses an [[Endo Steel]] chassis, as well as [[Ferro-Fibrous]] armor. For protection, the [['Mech]] carries two [[ER Medium Laser]]s and two [[Anti-Personnel Pod]]s to discourage infantry attacks. The electronics carried by this [['Mech]] include a Beagle [[Active Probe]], Guardian ECM suite, and a [[TAG]] laser designator. BV (1.0) = 631, BV (2.0) = 868<ref>''Record Sheets: Phoenix Upgrades'', p. 55</ref>
 
* OTT-9S - The -9S model is also a rebuild of the ''Ostscout''. This model also uses an [[Endo Steel]] chassis, as well as [[Ferro-Fibrous]] armor. For protection, the [['Mech]] carries two [[ER Medium Laser]]s and two [[Anti-Personnel Pod]]s to discourage infantry attacks. The electronics carried by this [['Mech]] include a Beagle [[Active Probe]], Guardian ECM suite, and a [[TAG]] laser designator. BV (1.0) = 631, BV (2.0) = 868<ref>''Record Sheets: Phoenix Upgrades'', p. 55</ref>
  
* OTT-10CS - Produced by [[Krupp Armament Works]], the 10CS ''Ostscout'' saves weight through the use of an [[XL Engine]] and an [[XL Gyro]], which gives up durability for more combat payload weight, allowing the 'Mech to jump up to three hundred meters through the use of ten Rawlings 45i [[Improved Jump Jets]]. The 10CS carries an [[improved C3 computer]] to communicate with similarly equipped units and carries two Diverse Optics [[ER Medium Laser]]s for defensive combat capabilities.<ref>''Record Sheets: Phoenix Upgrades'', p. 56</ref><ref>[http://battlecorps.com/BC2/news.html?article=428 "Boring Recon? No More!"]</ref>
+
* OTT-10CS - Produced by [[Krupp Armament Works]], the -10CS ''Ostscout'' saves weight through the use of an [[XL Engine]] and an [[XL Gyro]], which gives up durability for more combat payload weight, allowing the 'Mech to jump up to 300 meters through the use of ten Rawlings 45i [[Improved Jump Jets]]. The -10CS carries an [[improved C3 computer]] to communicate with similarly equipped units and carries two Diverse Optics [[ER Medium Laser]]s for defensive combat capabilities.<ref>''Record Sheets: Phoenix Upgrades'', p. 56</ref><ref>[http://battlecorps.com/BC2/news.html?article=428 "Boring Recon? No More!"]</ref>
  
 
==Gallery==
 
==Gallery==

Revision as of 15:35, 19 August 2010

Ostscout
Ostscout
Production information
Manufacturer Kong Interstellar Corporation
Model OTT-7J
Class Light
Cost 3,416,760 C-bills
Technical specifications
Mass 35 tons
Chassis Kell/S
Armor Durallex Light
Engine VOX 280
Speed 129.6 km/h
Jump Jets Ostmann Sct-A
Armament
BV (1.0) 497[1]
BV (2.0) 596


Description

The Ostscout was designed a pure recon 'Mech. To that end, it was built with a maximum speed of 129.6 kph. The design also utilizes eight jump jets, giving it a jumping capacity of 240 meters annd allowing it to outmaneuver almost any BattleMech in existence. The Ostscout also relies on an advanced sensor suite to gather information about the surrounding terrain and the disposition of enemy forces. Most Ostscout pilots will not even attempt to engage enemy 'Mechs, as the advanced sensor system is extremely rare and nearly impossible to replace.

Armament

The Ostscout carries a single Tronel II Medium Laser. This weapon, while not extremely powerful, is enough to dissuade most light scout assets from attempting to pursue.

Variants

  • OTT-7K - The -7K Ostscout replaces the Medium Laser with the new TAG laser designator, sacrificing its limited offensive capability to allow it to designate targets for Arrow IV artillery missiles. Otherwise, the -7K Ostscout is identical to the 7J model. BV (1.0) = 372, BV (2.0) = 484[4]

Gallery

References

  1. Combat Operations, p. 107
  2. Technical Readout: 3075, p. 169
  3. Record Sheets: 3075 Unabridged, p. 157
  4. Record Sheets: Phoenix Upgrades, p. 53
  5. Record Sheets: Phoenix Upgrades, p. 54
  6. Record Sheets: Phoenix Upgrades, p. 55
  7. Record Sheets: Phoenix Upgrades, p. 56
  8. "Boring Recon? No More!"

Bibliography