Difference between revisions of "Blackjack (BattleMech)"
Sarna News
(proper noun capitalization project) |
m (title, hard apostrophe, citation fixes, whitespace cleanup, section order) |
||
| Line 23: | Line 23: | ||
*2x [[Autocannon/2]]s | *2x [[Autocannon/2]]s | ||
* 4x [[medium laser]]s | * 4x [[medium laser]]s | ||
| − | |BV (1.0)=795<ref name=CO126>''Combat Operations'', p. 126</ref> | + | |BV (1.0) = 795<ref name=CO126>''Combat Operations'', p. 126</ref> |
| − | |BV (2.0)=949<ref>''Record Sheets: 3039'', p. 110</ref> | + | |BV (2.0) = 949<ref>''Record Sheets: 3039'', p. 110</ref> |
}} | }} | ||
==Description== | ==Description== | ||
| − | The '''''Blackjack''''' was designed by [[General Motors]] in the decades before the fall of the [[Star League]], as seditious revolutionaries began popping up while the League's authority was eroding, mainly in the [[Periphery]]. In [[2757]], to combat the increasing threats of the separatists, the League contracted for a medium [[BattleMech]] to be built with anti-insurgency and fire-support capabilities. General Motors' original prototype was equipped with a large [[fusion engine]] supplying increased speed and endurance and [[flamer]] weapons, but these were eventually replaced with more reliable [[autocannon]]s and a smaller engine supported by [[Jump Jet]]s. The final production model met all of the production requirements and by all accounts was destined to be regarded as a good, reliable 'Mech.<ref name=TRO3025r>''Technical Readout: 3025 Revised'', | + | The '''''Blackjack''''' was designed by [[General Motors]] in the decades before the fall of the [[Star League]], as seditious revolutionaries began popping up while the League's authority was eroding, mainly in the [[Periphery]]. In [[2757]], to combat the increasing threats of the separatists, the League contracted for a medium [[BattleMech]] to be built with anti-insurgency and fire-support capabilities. General Motors' original prototype was equipped with a large [[fusion engine]] supplying increased speed and endurance and [[flamer]] weapons, but these were eventually replaced with more reliable [[autocannon]]s and a smaller engine supported by [[Jump Jet]]s. The final production model met all of the production requirements and by all accounts was destined to be regarded as a good, reliable 'Mech.<ref name=TRO3025r>''Technical Readout: 3025 Revised'', pp. 46–47</ref><ref name=TRO3039>''Technical Readout: 3039'', pp. 128–129</ref> |
| − | General Motors was blindsided by the bad press the ''Blackjack'' received upon its introduction. Chief among its critics was the charge that the StarGuard II armor was brittle and tended to fall off, and that its footpads were too narrow and made it susceptible to falling. None of these claims were ever substantiated, but the damage was already done. The ''Blackjack'' quickly fell out of favor and only spent a few years in service to the Star League. It wasn't long before production was halted altogether and those still in service were either given to [[Terran Hegemony]] militia units or sold off to the Member States. When the Star League was eventually dissolved and the [[Succession Wars (History)|Succession Wars]] began, few shed a tear as the ''Blackjack'' production line on [[Kathil]] was destroyed in [[2796]].<ref name=TRO3025r/><ref name=TRO3039/><ref name=TRO3050u>''Technical Readout: 3050 Upgrade'', | + | General Motors was blindsided by the bad press the ''Blackjack'' received upon its introduction. Chief among its critics was the charge that the StarGuard II armor was brittle and tended to fall off, and that its footpads were too narrow and made it susceptible to falling. None of these claims were ever substantiated, but the damage was already done. The ''Blackjack'' quickly fell out of favor and only spent a few years in service to the Star League. It wasn't long before production was halted altogether and those still in service were either given to [[Terran Hegemony]] militia units or sold off to the Member States. When the Star League was eventually dissolved and the [[Succession Wars (History)|Succession Wars]] began, few shed a tear as the ''Blackjack'' production line on [[Kathil]] was destroyed in [[2796]].<ref name=TRO3025r/><ref name=TRO3039/><ref name=TRO3050u>''Technical Readout: 3050 Upgrade'', pp. 46–47</ref> |
| − | While all the Successor States had ''Blackjacks'' the majority ended up with the [[Capellan Confederation]] and [[Federated Suns]], and all but the Suns largely abandoned the design based on its reputation. Tinkering with the 'Mech, Davion techs soon discovered that the reputed claims about the ''Blackjack'' | + | While all the Successor States had ''Blackjacks'' the majority ended up with the [[Capellan Confederation]] and [[Federated Suns]], and all but the Suns largely abandoned the design based on its reputation. Tinkering with the 'Mech, Davion techs soon discovered that the reputed claims about the ''Blackjack'''s flaws were without foundation, although it was still largely relegated to the March Militias. It wouldn't be until [[3022]] that the myth received its first mortal wound on [[Xhosa VII]]. In battle for control of the planet the infamous ''[[Tai-i]]'' [[Mercer Ravannion]] attempted to test his "Horde" tactic against the local Davion garrison. Led by [[New Avalon Institute of Science]] cadet [[Michael Ubodo]], the garrison's ''Blackjack''s took the brunt of the Kuritan attack, destroying wave after wave of light 'Mechs attempting to overwhelm their position, and earned great honor for their successful defense.<ref name=TRO3025r/><ref name=TRO3039/><ref name=TRO3050u/> |
In the aftermath of the battle other Davion units began to take renewed notice of the ''Blackjack'', and even [[Hanse Davion]] was sufficiently impressed with their performance on Xhosa VII to commission new variants be built. For their part the Confederation continued to treat the design with utter contempt, although the breakaway nation of [[St. Ives Compact]] couldn't afford to be as discerning and adopted the ''Blackjack'', experimenting with new variants of their own. These efforts culminated with the introduction of the BJ-2, built by Davion techs using newly-recovered [[lostech]], which was first a refit kit before limited production restarted at General Motor's Kathil plant in [[3054]]. Further variants would continue to be produced by both St. Ives and the Federated Suns, and eventually a new [[OmniMech]] version of the ''[[Blackjack (OmniMech)|Blackjack]]'' was completed in [[3058]].<ref name=TRO3050u/><ref name=TRO3058/> | In the aftermath of the battle other Davion units began to take renewed notice of the ''Blackjack'', and even [[Hanse Davion]] was sufficiently impressed with their performance on Xhosa VII to commission new variants be built. For their part the Confederation continued to treat the design with utter contempt, although the breakaway nation of [[St. Ives Compact]] couldn't afford to be as discerning and adopted the ''Blackjack'', experimenting with new variants of their own. These efforts culminated with the introduction of the BJ-2, built by Davion techs using newly-recovered [[lostech]], which was first a refit kit before limited production restarted at General Motor's Kathil plant in [[3054]]. Further variants would continue to be produced by both St. Ives and the Federated Suns, and eventually a new [[OmniMech]] version of the ''[[Blackjack (OmniMech)|Blackjack]]'' was completed in [[3058]].<ref name=TRO3050u/><ref name=TRO3058/> | ||
| Line 44: | Line 44: | ||
*;BJ-1X : Early ''Blackjack'' prototype differed from the production model significantly. It was armed with twin [[GM Flashpoint]] [[flamer]]s and additional heat sinks in place of each autocannon, and was powered by a VOX 225 power plant allowing it for greater speed than the later models, but lacked the Jump Jet.<ref name=TRO3025r/><ref name=TRO3039/> | *;BJ-1X : Early ''Blackjack'' prototype differed from the production model significantly. It was armed with twin [[GM Flashpoint]] [[flamer]]s and additional heat sinks in place of each autocannon, and was powered by a VOX 225 power plant allowing it for greater speed than the later models, but lacked the Jump Jet.<ref name=TRO3025r/><ref name=TRO3039/> | ||
| − | *;BJ-1DB : The 1DB ''Blackjack'' is a Federated Suns variant intended to increase the 'Mech's lethality. Introduced in [[3022]] after the BJ-1's success on Xhosha VII, one ton of armor plus the arm-mounted autocannons and torso-mounted lasers<ref>''[http://bg.battletech.com/forums/index.php?topic=3797.msg1204705#msg1204705 Errata report by user jymset] that was confirmed by [http://bg.battletech.com/forums/index.php?topic=52212.msg1205301#msg1205301 the moderator Xotl]''</ref> were replaced with two [[Large Laser]]s and six extra heat sinks added to the design to handle the extra heat load.<ref name=TRO3039/> BV (1.0) = 881<ref name=CO126/> | + | *;BJ-1DB : The 1DB ''Blackjack'' is a Federated Suns variant intended to increase the 'Mech's lethality. Introduced in [[3022]] after the BJ-1's success on Xhosha VII, one ton of armor plus the arm-mounted autocannons and torso-mounted lasers<ref>''[http://bg.battletech.com/forums/index.php?topic=3797.msg1204705#msg1204705 Errata report by user jymset] that was confirmed by [http://bg.battletech.com/forums/index.php?topic=52212.msg1205301#msg1205301 the moderator Xotl]''</ref> were replaced with two [[Large Laser]]s and six extra heat sinks added to the design to handle the extra heat load.<ref name=TRO3039/> BV (1.0) = 881,<ref name=CO126/> BV (2.0) = 1,015<ref>''Record Sheets: 3039'', p. 111</ref> |
| − | *;BJ-1DC : The 1DC ''Blackjack'' is another variant inspired by the Xhosha VII battle and was introduced a year after the similar 1DB. Rather than replace the arm-mounted weapons the 1DC sacrifices the 'Mech's jumping ability in order to add two [[Small Laser]]s and an additional heat sink to deal with the extra heat load. BV (1.0) = 718<ref name=CO126/> | + | *;BJ-1DC : The 1DC ''Blackjack'' is another variant inspired by the Xhosha VII battle and was introduced a year after the similar 1DB. Rather than replace the arm-mounted weapons the 1DC sacrifices the 'Mech's jumping ability in order to add two [[Small Laser]]s and an additional heat sink to deal with the extra heat load. BV (1.0) = 718,<ref name=CO126/> BV (2.0) = 917<ref>''Record Sheets: 3039'', p. 112</ref> |
| − | *; BJ-2 : The BJ-2 was introduced in [[3052]] by the Federated Suns as the new production model of the ''Blackjack'', based on earlier experimental designs. It upgrades the 'Mech with two [[Diverse Optics Sunbeam (ERLL)|Diverse Optics Sunbeam]] [[ER Large Laser]]s in place of the autocannons and removes the medium lasers for four [[Hovertec (SSRM2)|Hovertec]] [[Streak SRM-2]] launchers, two each in the left and right sides of the torso. One ton of ammo for the launchers is kept in the left torso while the standard heat sinks were upgraded to [[double heat sink]]s.<ref name=TRO3050u/> Note that the BJ-2 | + | *; BJ-2 : The BJ-2 was introduced in [[3052]] by the Federated Suns as the new production model of the ''Blackjack'', based on earlier experimental designs. It upgrades the 'Mech with two [[Diverse Optics Sunbeam (ERLL)|Diverse Optics Sunbeam]] [[ER Large Laser]]s in place of the autocannons and removes the medium lasers for four [[Hovertec (SSRM2)|Hovertec]] [[Streak SRM-2]] launchers, two each in the left and right sides of the torso. One ton of ammo for the launchers is kept in the left torso while the standard heat sinks were upgraded to [[double heat sink]]s.<ref name=TRO3050u/> Note that errata corrected the BJ-2 to use double heat sinks. BV (1.0) = 858,<ref name=CO126/> BV (2.0) = 1,148 |
*; BJ-2r : Introduced in the [[Dark Age]] this ''Blackjack'' variant replaces the weaponry of the BJ-2 with a [[Large Re-Engineered Laser]] in each arm, backed up by a single medium laser. It can jump 120 meters at a time, and uses eleven double heat sinks. BV (2.0) = 1,076<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 111</ref> | *; BJ-2r : Introduced in the [[Dark Age]] this ''Blackjack'' variant replaces the weaponry of the BJ-2 with a [[Large Re-Engineered Laser]] in each arm, backed up by a single medium laser. It can jump 120 meters at a time, and uses eleven double heat sinks. BV (2.0) = 1,076<ref>''Record Sheets: 3145 New Tech, New Upgrades'', p. 111</ref> | ||
| − | *; BJ-3 : Built in 3042 by the [[Capellan Confederation]] on [[St. Ives]] based on the experimental BJ-3X, created during the [[Fourth Succession War]], this 'Mech was probably the first in decades if not centuries to feature [[Double Heat Sink]]s, a revolutionary rediscovered technology. It is implied<ref> | + | *; BJ-3 : Built in 3042 by the [[Capellan Confederation]] on [[St. Ives]] based on the experimental BJ-3X, created during the [[Fourth Succession War]], this 'Mech was probably the first in decades if not centuries to feature [[Double Heat Sink]]s, a revolutionary rediscovered technology. It is implied<ref>''Proprietary''</ref> that the heat sinks were actually stolen from the [[Federated Suns]] and [[Lyran Commonwealth]], but in any case the BJ-3 was the first regular variant to employ them again as part of its standard loadout (as opposed to field refits or ancient [[Star League era]] 'Mechs). The superior heat dissipation allowed the 'Mech to be equipped with two [[Ceres Arms Smasher]] [[PPC]]s and four medium lasers. The majority of the BJ-3 models were turned over to the Federated Suns by the [[St. Ives Compact]] after the Fourth Succession War, following that state's secession from the Confederation during the war,<ref name=BPFSW-37>''BattlePack: Fourth Succession War'', p. 37: New 'Mechs - BJ-3 ''Blackjack''</ref> but production continued domestically within the St. Ives Compact, predominantly but not exclusively for St. Ives Compact forces, afterwards.<ref name=TRO3050u/> BV (1.0) = 1,099, BV (2.0) = 1,271<ref>''Record Sheets: 3039'', p. 113</ref><ref>''Objective Raids'', p. 148</ref> (The dates and ancillary data from the [[MUL]] establish that the BJ-3 featured in the ''Fourth Succession War Scenarios: Volume 1'' was actually the BJ-3X; this would also have been the one to receive the stolen prototype Double Heat Sinks.) |
*;BJ-3X : The prototype version of the production model BJ-3, it differs only by mounting three [[Prototype Double Heat Sinks]] plus seven engine-mounted standard heat sinks.<ref name=TRO3039/> | *;BJ-3X : The prototype version of the production model BJ-3, it differs only by mounting three [[Prototype Double Heat Sinks]] plus seven engine-mounted standard heat sinks.<ref name=TRO3039/> | ||
| Line 58: | Line 58: | ||
*; BJ-4 : Many ''Blackjack''s in the Federated Suns were upgraded to this model during the [[FedCom Civil War]]. A half-ton of armor is removed, though it is upgraded to [[Light Ferro-Fibrous]], resulting in almost the same amount of armor protection. All the weapons of the BJ-2 were stripped out and a [[light fusion engine]] was included to free up additional mass. Each arm mounts a [[light autocannon/5]] and an [[ER medium laser]], while two tons of [[CASE]]-protected ammo in each torso allow the BJ-4 to make use of special munitions. A [[Targeting Computer]] makes all the weapons more accurate.<ref name=TRO3050u/> BV (2.0) = 1,063<ref name=MUL73>''Master Unit List: Battle Values'', p. 73</ref> | *; BJ-4 : Many ''Blackjack''s in the Federated Suns were upgraded to this model during the [[FedCom Civil War]]. A half-ton of armor is removed, though it is upgraded to [[Light Ferro-Fibrous]], resulting in almost the same amount of armor protection. All the weapons of the BJ-2 were stripped out and a [[light fusion engine]] was included to free up additional mass. Each arm mounts a [[light autocannon/5]] and an [[ER medium laser]], while two tons of [[CASE]]-protected ammo in each torso allow the BJ-4 to make use of special munitions. A [[Targeting Computer]] makes all the weapons more accurate.<ref name=TRO3050u/> BV (2.0) = 1,063<ref name=MUL73>''Master Unit List: Battle Values'', p. 73</ref> | ||
| − | *; BJ-5 : Introduced in [[3107]] this variant carries four [[Light PPC]]s and two [[Light AC/2]]s to extend the ''Blackjack'' | + | *; BJ-5 : Introduced in [[3107]] this variant carries four [[Light PPC]]s and two [[Light AC/2]]s to extend the ''Blackjack'''s engagement range. To make room for this, the 'Mech uses Endo Steel chassis, Light Engine, and Light Ferro-Fibrous armor.<ref name=rg4p13>''Recognition Guide: ilClan, vol. 4'', p. 13</ref> A single ton of autocannon ammunition is stored in a [[CASE II]] protected bay. BV (2.0) = 1,165<ref>''Recognition Guide: ilClan, vol. 4'', p. 20</ref> |
| − | *; ''Blackjack'' C : A [[Clan]]-tech refit, equipped similarly to the BJ-2. This variant carries a [[Large Pulse Laser]] in each arm, and a [[Streak SRM-4]] in each side torso. The ammunition for the missile launchers is carried in the left torso, protected by a [[CASE II]] system - the 'Mech also sports Double Heat Sinks and [[ferro-fibrous]] armor. BV (2.0) = 1,639 <ref>''ForcePack Record Sheets: Wolf's Dragoons'', p. 2</ref> | + | *; ''Blackjack'' C : A [[Clan]]-tech refit, equipped similarly to the BJ-2. This variant carries a [[Large Pulse Laser]] in each arm, and a [[Streak SRM-4]] in each side torso. The ammunition for the missile launchers is carried in the left torso, protected by a [[CASE II]] system - the 'Mech also sports Double Heat Sinks and [[ferro-fibrous]] armor. BV (2.0) = 1,639<ref>''ForcePack Record Sheets: Wolf's Dragoons'', p. 2</ref> |
===Apocryphal Variants=== | ===Apocryphal Variants=== | ||
{{ApocryphalContentStart}} | {{ApocryphalContentStart}} | ||
''From [[MechWarrior Online]]:'' | ''From [[MechWarrior Online]]:'' | ||
| − | *; BJ-A "Arrow" : MechWarrior Online's apocryphal version of [[Michael Ubodo]]'s ''Arrow'' is armed with a trio of [[Machine Gun]]s in each arm supplied with two tons of ammo, supported by a medium laser in side torso and a Large Pulse Laser mounted in the center torso. Mounting a 235 standard engine, its variation of the ''Arrow'' is clad in ferro-fibrous armor on an [[Endo Steel]] frame, carrying eleven Double Heat Sinks and just two Jump Jets.<ref name=MWO>''MechWarrior Online'' | + | *; BJ-A "Arrow" : MechWarrior Online's apocryphal version of [[Michael Ubodo]]'s ''Arrow'' is armed with a trio of [[Machine Gun]]s in each arm supplied with two tons of ammo, supported by a medium laser in side torso and a Large Pulse Laser mounted in the center torso. Mounting a 235 standard engine, its variation of the ''Arrow'' is clad in ferro-fibrous armor on an [[Endo Steel]] frame, carrying eleven Double Heat Sinks and just two Jump Jets.<ref name=MWO>''MechWarrior Online'': "The Arrow Hero Mech now available"</ref> |
{{ApocryphalContentEnd}} | {{ApocryphalContentEnd}} | ||
| − | |||
| − | |||
| − | |||
==Design Quirks== | ==Design Quirks== | ||
| − | The ''Blackjack'' has the following [[Design Quirk]]:<ref>''BattleMech Manual'', p. 90 Design Quirk Table - ''Blackjack'' Entry</ref> | + | The ''Blackjack'' has the following [[Design Quirk]]:<ref>''BattleMech Manual'', p. 90: Design Quirk Table - ''Blackjack'' Entry</ref> |
*[[Bad Reputation]] (prior to Clan Invasion Era) | *[[Bad Reputation]] (prior to Clan Invasion Era) | ||
| Line 81: | Line 78: | ||
* In French products, the unit's proper name was translated as '''Assommoir'''. | * In French products, the unit's proper name was translated as '''Assommoir'''. | ||
| + | |||
| + | ==Related OmniMechs== | ||
| + | * ''[[Blackjack (OmniMech)|Blackjack]]'' - This OmniMech version of the venerable ''Blackjack'' debuted around 3058.<ref name=TRO3058>''Technical Readout: 3058'', p. 88</ref> | ||
==Gallery== | ==Gallery== | ||
| Line 102: | Line 102: | ||
==Bibliography== | ==Bibliography== | ||
<div class="desktop-3-col"> | <div class="desktop-3-col"> | ||
| − | *''[[BattleMech Manual]]'' | + | * ''[[BattleMech Manual]]'' |
| − | *''[[BattlePack: Fourth Succession War]]'' | + | * ''[[BattlePack: Fourth Succession War]]'' |
| − | *''[[Combat Operations]]'' | + | * ''[[Combat Operations]]'' |
| − | *''[[Master Unit List]]'' | + | * ''[[Master Unit List]]'' |
| − | *''[[Master Unit List: Battle Values]]'' | + | * ''[[Master Unit List: Battle Values]]'' |
| − | *''MechWarrior Online'' [http://mwomercs.com/forums/topic/160032-arrow-hero-mech-now-available/ The Arrow Hero Mech now available] | + | * ''MechWarrior Online'' [http://mwomercs.com/forums/topic/160032-arrow-hero-mech-now-available/ The Arrow Hero Mech now available] |
| − | *''[[Objective Raids]]'' | + | * ''[[Objective Raids]]'' |
| − | * | + | * ''[[Proprietary]]'' (short story) |
| − | *''[[Recognition Guide: ilClan, vol. 4]]'' | + | * ''[[Recognition Guide: ilClan, vol. 4]]'' |
| − | *''[[Record Sheets: 3039]]'' | + | * ''[[Record Sheets: 3039]]'' |
| − | *''[[Record Sheets: 3050 Upgrade (Inner Sphere)]]'' | + | * ''[[Record Sheets: 3050 Upgrade (Inner Sphere)]]'' |
| − | *''[[Record Sheets: 3145 New Tech, New Upgrades]]'' | + | * ''[[Record Sheets: 3145 New Tech, New Upgrades]]'' |
| − | *''[[Technical Readout: 3025]]'' | + | * ''[[Technical Readout: 3025]]'' |
| − | *''[[Technical Readout: 3025 Revised]]'' | + | * ''[[Technical Readout: 3025 Revised]]'' |
| − | *''[[Technical Readout: 3039]]'' | + | * ''[[Technical Readout: 3039]]'' |
| − | *''[[Technical Readout: 3050]]'' | + | * ''[[Technical Readout: 3050]]'' |
| − | *''[[Technical Readout: 3050 Revised]]'' | + | * ''[[Technical Readout: 3050 Revised]]'' |
| − | *''[[Technical Readout: 3050 Upgrade]]'' | + | * ''[[Technical Readout: 3050 Upgrade]]'' |
</div> | </div> | ||
Revision as of 22:17, 24 July 2022
- This article is about the 45-ton BattleMech. For the 50-ton OmniMech, see Blackjack (OmniMech).
| |
| Blackjack | |
|---|---|
| Production information | |
| Manufacturer | General Motors, Ceres Metals Industries |
| Production Year | 2757[1][2] |
| Model | BJ-1 |
| Class | Medium |
| Cost | 3,147,225 C-bills |
| Technical specifications | |
| 'Mech type | Inner Sphere BattleMech |
| Mass | 45 tons |
| Chassis | GM BJ-I |
| Armor | Durallex Medium |
| Engine | GM 180 |
| Communications System | Dalban Micronics |
| Targeting Tracking System | Dalban AQ |
| Heat Sinks | 11 |
| Speed | 64.8 km/h |
| Jump Jets | Whitworth Jetlift |
| Armament |
|
| BV (1.0) | 795[3] |
| BV (2.0) | 949[4] |
Contents
Description
The Blackjack was designed by General Motors in the decades before the fall of the Star League, as seditious revolutionaries began popping up while the League's authority was eroding, mainly in the Periphery. In 2757, to combat the increasing threats of the separatists, the League contracted for a medium BattleMech to be built with anti-insurgency and fire-support capabilities. General Motors' original prototype was equipped with a large fusion engine supplying increased speed and endurance and flamer weapons, but these were eventually replaced with more reliable autocannons and a smaller engine supported by Jump Jets. The final production model met all of the production requirements and by all accounts was destined to be regarded as a good, reliable 'Mech.[5][6]
General Motors was blindsided by the bad press the Blackjack received upon its introduction. Chief among its critics was the charge that the StarGuard II armor was brittle and tended to fall off, and that its footpads were too narrow and made it susceptible to falling. None of these claims were ever substantiated, but the damage was already done. The Blackjack quickly fell out of favor and only spent a few years in service to the Star League. It wasn't long before production was halted altogether and those still in service were either given to Terran Hegemony militia units or sold off to the Member States. When the Star League was eventually dissolved and the Succession Wars began, few shed a tear as the Blackjack production line on Kathil was destroyed in 2796.[5][6][7]
While all the Successor States had Blackjacks the majority ended up with the Capellan Confederation and Federated Suns, and all but the Suns largely abandoned the design based on its reputation. Tinkering with the 'Mech, Davion techs soon discovered that the reputed claims about the Blackjack's flaws were without foundation, although it was still largely relegated to the March Militias. It wouldn't be until 3022 that the myth received its first mortal wound on Xhosa VII. In battle for control of the planet the infamous Tai-i Mercer Ravannion attempted to test his "Horde" tactic against the local Davion garrison. Led by New Avalon Institute of Science cadet Michael Ubodo, the garrison's Blackjacks took the brunt of the Kuritan attack, destroying wave after wave of light 'Mechs attempting to overwhelm their position, and earned great honor for their successful defense.[5][6][7]
In the aftermath of the battle other Davion units began to take renewed notice of the Blackjack, and even Hanse Davion was sufficiently impressed with their performance on Xhosa VII to commission new variants be built. For their part the Confederation continued to treat the design with utter contempt, although the breakaway nation of St. Ives Compact couldn't afford to be as discerning and adopted the Blackjack, experimenting with new variants of their own. These efforts culminated with the introduction of the BJ-2, built by Davion techs using newly-recovered lostech, which was first a refit kit before limited production restarted at General Motor's Kathil plant in 3054. Further variants would continue to be produced by both St. Ives and the Federated Suns, and eventually a new OmniMech version of the Blackjack was completed in 3058.[7][8]
Weapons and Equipment
The Blackjack carries a 40mm Whirlwind-L Autocannon in either arm for long range, direct fire support. While these autocannons provide excellent reach and were sufficient for combating mostly non-'Mech insurgents, they lacked the firepower to deal with well-armored targets. Both weapons are fed from a single ton of ammo located within the center torso. For close combat, the Blackjack has four Intek medium lasers, one in each arm and both the left and right sides of the torso. These lasers, when combined with its maneuverability, make the 'Mech very dangerous and an entire lance or company of Blackjacks can lay down impressive firepower.[5][6]
Two Whitworth Jetlift Jump Jets in either leg give the Blackjack a jumping distance of 120 meters. These were added late in the design's development, compensation for using the GM 180 fusion engine which was smaller than in the original. Eight and a half tons of armor protect the Blackjack while eleven heat sinks keep it cool during combat.[5][6]
Variants
- BJ-1X
- Early Blackjack prototype differed from the production model significantly. It was armed with twin GM Flashpoint flamers and additional heat sinks in place of each autocannon, and was powered by a VOX 225 power plant allowing it for greater speed than the later models, but lacked the Jump Jet.[5][6]
- BJ-1DB
- The 1DB Blackjack is a Federated Suns variant intended to increase the 'Mech's lethality. Introduced in 3022 after the BJ-1's success on Xhosha VII, one ton of armor plus the arm-mounted autocannons and torso-mounted lasers[9] were replaced with two Large Lasers and six extra heat sinks added to the design to handle the extra heat load.[6] BV (1.0) = 881,[3] BV (2.0) = 1,015[10]
- BJ-1DC
- The 1DC Blackjack is another variant inspired by the Xhosha VII battle and was introduced a year after the similar 1DB. Rather than replace the arm-mounted weapons the 1DC sacrifices the 'Mech's jumping ability in order to add two Small Lasers and an additional heat sink to deal with the extra heat load. BV (1.0) = 718,[3] BV (2.0) = 917[11]
- BJ-2
- The BJ-2 was introduced in 3052 by the Federated Suns as the new production model of the Blackjack, based on earlier experimental designs. It upgrades the 'Mech with two Diverse Optics Sunbeam ER Large Lasers in place of the autocannons and removes the medium lasers for four Hovertec Streak SRM-2 launchers, two each in the left and right sides of the torso. One ton of ammo for the launchers is kept in the left torso while the standard heat sinks were upgraded to double heat sinks.[7] Note that errata corrected the BJ-2 to use double heat sinks. BV (1.0) = 858,[3] BV (2.0) = 1,148
- BJ-2r
- Introduced in the Dark Age this Blackjack variant replaces the weaponry of the BJ-2 with a Large Re-Engineered Laser in each arm, backed up by a single medium laser. It can jump 120 meters at a time, and uses eleven double heat sinks. BV (2.0) = 1,076[12]
- BJ-3
- Built in 3042 by the Capellan Confederation on St. Ives based on the experimental BJ-3X, created during the Fourth Succession War, this 'Mech was probably the first in decades if not centuries to feature Double Heat Sinks, a revolutionary rediscovered technology. It is implied[13] that the heat sinks were actually stolen from the Federated Suns and Lyran Commonwealth, but in any case the BJ-3 was the first regular variant to employ them again as part of its standard loadout (as opposed to field refits or ancient Star League era 'Mechs). The superior heat dissipation allowed the 'Mech to be equipped with two Ceres Arms Smasher PPCs and four medium lasers. The majority of the BJ-3 models were turned over to the Federated Suns by the St. Ives Compact after the Fourth Succession War, following that state's secession from the Confederation during the war,[14] but production continued domestically within the St. Ives Compact, predominantly but not exclusively for St. Ives Compact forces, afterwards.[7] BV (1.0) = 1,099, BV (2.0) = 1,271[15][16] (The dates and ancillary data from the MUL establish that the BJ-3 featured in the Fourth Succession War Scenarios: Volume 1 was actually the BJ-3X; this would also have been the one to receive the stolen prototype Double Heat Sinks.)
- BJ-3X
- The prototype version of the production model BJ-3, it differs only by mounting three Prototype Double Heat Sinks plus seven engine-mounted standard heat sinks.[6]
- BJ-4
- Many Blackjacks in the Federated Suns were upgraded to this model during the FedCom Civil War. A half-ton of armor is removed, though it is upgraded to Light Ferro-Fibrous, resulting in almost the same amount of armor protection. All the weapons of the BJ-2 were stripped out and a light fusion engine was included to free up additional mass. Each arm mounts a light autocannon/5 and an ER medium laser, while two tons of CASE-protected ammo in each torso allow the BJ-4 to make use of special munitions. A Targeting Computer makes all the weapons more accurate.[7] BV (2.0) = 1,063[17]
- BJ-5
- Introduced in 3107 this variant carries four Light PPCs and two Light AC/2s to extend the Blackjack's engagement range. To make room for this, the 'Mech uses Endo Steel chassis, Light Engine, and Light Ferro-Fibrous armor.[18] A single ton of autocannon ammunition is stored in a CASE II protected bay. BV (2.0) = 1,165[19]
- Blackjack C
- A Clan-tech refit, equipped similarly to the BJ-2. This variant carries a Large Pulse Laser in each arm, and a Streak SRM-4 in each side torso. The ammunition for the missile launchers is carried in the left torso, protected by a CASE II system - the 'Mech also sports Double Heat Sinks and ferro-fibrous armor. BV (2.0) = 1,639[20]
Apocryphal Variants
From MechWarrior Online:
- BJ-A "Arrow"
- MechWarrior Online's apocryphal version of Michael Ubodo's Arrow is armed with a trio of Machine Guns in each arm supplied with two tons of ammo, supported by a medium laser in side torso and a Large Pulse Laser mounted in the center torso. Mounting a 235 standard engine, its variation of the Arrow is clad in ferro-fibrous armor on an Endo Steel frame, carrying eleven Double Heat Sinks and just two Jump Jets.[21]
Design Quirks
The Blackjack has the following Design Quirk:[22]
- Bad Reputation (prior to Clan Invasion Era)
Notes
- Errata was submitted for Technical Readout: 3039, p. 128, Variants, 2nd paragraph: "Change the following sentence pertaining to the BJ-1DB: 'This necessitated the removal of the arm-mounted medium lasers...' to 'This necessitated the removal of the torso-mounted medium lasers...'"
- In German products, the unit's proper name was translated to Totschläger, which is the common German expression for a baton (aka as Blackjack in American English). The model code was accordingly changed to TG-1.
- In French products, the unit's proper name was translated as Assommoir.
Related OmniMechs
Gallery
Original BJ-1 Blackjack from TRO:3025
BJ-2 Blackjack from TRO:3050
BJ-2 Blackjack from TRO:3050 Upgrade
Blackjack from RG:ilClan v4
Blackjack in colors of Capellan Hussars from Camo Specs
BJ-3 Blackjack from BP:4thSW
BJ-1 Blackjack in battle from CCG
BJ-2 Blackjack in combat from CCG
BJ-3 Blackjack in combat from CCG
Blackjack concept art from MWO
BJ-A Blackjack "Arrow" in combat from MW5:Mercs
References
- ↑ Record Sheets: 3039, 2nd Ed., p. 48
- ↑ MUL online date for the Blackjack (BattleMech)
- ↑ 3.0 3.1 3.2 3.3 Combat Operations, p. 126
- ↑ Record Sheets: 3039, p. 110
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 Technical Readout: 3025 Revised, pp. 46–47
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 Technical Readout: 3039, pp. 128–129
- ↑ 7.0 7.1 7.2 7.3 7.4 7.5 Technical Readout: 3050 Upgrade, pp. 46–47
- ↑ 8.0 8.1 Technical Readout: 3058, p. 88
- ↑ Errata report by user jymset that was confirmed by the moderator Xotl
- ↑ Record Sheets: 3039, p. 111
- ↑ Record Sheets: 3039, p. 112
- ↑ Record Sheets: 3145 New Tech, New Upgrades, p. 111
- ↑ Proprietary
- ↑ BattlePack: Fourth Succession War, p. 37: New 'Mechs - BJ-3 Blackjack
- ↑ Record Sheets: 3039, p. 113
- ↑ Objective Raids, p. 148
- ↑ Master Unit List: Battle Values, p. 73
- ↑ Recognition Guide: ilClan, vol. 4, p. 13
- ↑ Recognition Guide: ilClan, vol. 4, p. 20
- ↑ ForcePack Record Sheets: Wolf's Dragoons, p. 2
- ↑ MechWarrior Online: "The Arrow Hero Mech now available"
- ↑ BattleMech Manual, p. 90: Design Quirk Table - Blackjack Entry
Bibliography
- BattleMech Manual
- BattlePack: Fourth Succession War
- Combat Operations
- Master Unit List
- Master Unit List: Battle Values
- MechWarrior Online The Arrow Hero Mech now available
- Objective Raids
- Proprietary (short story)
- Recognition Guide: ilClan, vol. 4
- Record Sheets: 3039
- Record Sheets: 3050 Upgrade (Inner Sphere)
- Record Sheets: 3145 New Tech, New Upgrades
- Technical Readout: 3025
- Technical Readout: 3025 Revised
- Technical Readout: 3039
- Technical Readout: 3050
- Technical Readout: 3050 Revised
- Technical Readout: 3050 Upgrade